Router-CIM Automation Suite

rcim_2024_header


rcim_2024_header


Previous topic Next topic  

rcim_2024_header


Previous topic Next topic  

4th Axis Interpolation Cycle

This cycle is to provide continuous four axis motions for aggregate heads and 90º heads on routers.

 

There is a provision to allow different tool geometry in the toolpaths, such as routers, moulder heads, angled heads.

 

Typically the geometry provided is still flat 2-D geometry, but 3-D geometry can be provided to all full 4th axis simultaneous programming if the machine allows for this motion.