|
|
|
|
|||
|
|
|
|
This provides the facility to view previously saved Cluster-parts stored in the default directory. At the AutoCAD command prompt you will be able to view a Cluster-part in .VEC, .DXG and .DXF file formats.
The following will appear sequentially at the AutoCAD command prompts when you click ViewClusterPart from the AutoNEST pulldown or icon menu:
Select part format to view –
Dwg\dXf\Vec <Vec>:
Cluster-part Name (? for list) <> :
Insertion Point:
Proceed to view another Cluster-part? (Y/N) <Y>:
Select part format to view – Dwg\dXf\Vec <Vec>:
This is to prompt for the type of file format that you wish to view.
•“D” for Dwg
•“X” for Dxf
•“V” for Vec
Cluster-part Name (? for list) <>:
This is to prompt for the name of the Cluster-part, which you wish to review.
Enter the required Cluster-part name.
Conversely, you can enter ?, which in turn will display a dialog box for you to select the Cluster-part name.
Insertion Point:
Pick a point on the screen. The specified Cluster-part will be displayed at the insertion point on the screen.
Proceed to view another Cluster-part? (Y/N) <Y>:
This prompt will allow you to view another Cluster-part without quitting the command.
